Loading...
Year: 2021
Final Beneficiary: “Bertam Grup” SRL.
Location: Chisinau city
Short description:
Automation system are destinated for curing oven control. Oven consists of 2 sections with a length of 6 and 9 meters. As central control unit PLC Schneider Electric Modicon are used. Heating control is made with solid state contactors. Control equipment consists of:
- Power panel (1 pcs)
- Automation switchgear (1 pcs)
- Heater control switchgear (6 pcs)
Works description:
- Design works
- Switchgears assembly
- Software developing
- Mounting works
- Commisioning works
Basic equipment:
PLC - Schneider Electric
Power and switching equipment - Schneider Electric, Oven
Intermediate Relays – Schneider Electric
Terminals - Phoenix Contact;
Switchgears - Tekpan;
Year: 2019
Client: “BEMAS” SRL.
Final Beneficiary: “Knauf-Gips” SRL.
Location: Bălți City
Short description:
Development and installation of waste water metering system based on an electromagnetic flow meter with output signals for connecting a GSM transmitter, including automatic operation of the sewage pump (by level)
Basic equipment:
Flowmeter – Endress+Hauser;
Power ans switching equipment – Schneider Electric;
Terminals – Wieland;
Year: 2022
Client: “Piroterm-Service” SRL.
Final Beneficiary: AUAI “Dubasarii Vechi”, “Europlant” SRL.
Location: Dubasarii Vechi village
Short description:
The project was supported by the “Fondul de Dezvoltare Durabila Moldova” and includes the following:
For SP1 pumping station:
Automation system for 3 pumping units (№3, 6, 8) control with electrical motor 630kW, 6kV. Control system includes central control switchgear and 3 local control panels
For SP2 pumpins station:
Automation system for 2 pumping units (MP7, MP8) with electrical motors 110kW, 0,4kV controlled by frequency converters with discharge pressure setpoint control. As well as automation system for pump unit MP6 with electrical motor 630kW, 6kV
For SP3 pumping station:
Automation system for 2 pumping units (MP7, MP8) with electrical motors 110kW, 0,4kV controlled by frequency converters with discharge pressure setpoint control.
Works description:
- Design works
- Switchgear assembly
- Mounting works
- Commisioning works
Basic equipment:
Frequency converter - Powtran
Power and switching equipment - Schneider Electric
Intermediate Relays – Schneider Electric
Terminals - Phoenix Contact
Switchgears - Tekpan
Year: 2022
Client: “Piroterm-Service” SRL
Final Beneficiary: AUAI “Gura Cainarului
Location: Gura Cainarului village
Short description:
The project was supported by the “Fondul de Dezvoltare Durabila Moldova” and includes the following:
Automation system installing based on PLC Siemens Simatic S7-1200 for 4 pumping units and vacuum system.
Pumping units №1, №2 with electrical motors 110kW controlled by frequency converters
Pumping units №3, №4 with electrical motors 355kW controlled by soft starter
Automatic system allows operation in fully automatic mode:
Creating vacuum – Starting the pump – opening discharge valve – pressure maintaining
Scope of works:
- Design works
- Switchgears assembly
- Mounting works
- Commisioning works
Basic equipment:
PLC and modules – Siemens
Power and switching equipment - Schneider Electric
Intermediate Relays – Schneider Electric
Terminals - Phoenix Contact
Switchgears - Tekpan
Year: 2021
Client: “Softwarestaff” SRL
Final Beneficiary: "Imcomvil Grup" SRL
Location: Chisinau city
Short description:
Automation system is destinated for corn curls transporting from extruder to prepacking unit by vibro conveyors. Control system in automatic mode made conveyors speed regulation depeding on conveyors filling status
Works description:
- Design works
- Control panel and operator cabinet assembly
- Software developing
- Mounting works
- Commisioning works
Basic equipment:
PLC and HMI panel - Siemens
Power and switching equipment - Schneider Electric
Intermediate Relays – Schneider Electric
Terminals - Phoenix Contact
Switchgears - Tekpan
Year: 2021
Client: Joint venture SADE-CGTH & VWS Romania
Final Beneficiary: “Apa-Canal Cantemir” S.A.
Location: Cantemir city
Short description:
Project includes construction of new waste water treatment plant in Cantemir city, raw water pumping station reconstruction works, mounting works for 3 waste water pumping stations
Works description:
- Design works for electrical part
- Adoptation works for automation design
- Power and control switchgear assembly
- Electrical works
- Commisioning works
Basic equipment:
PLC and HMI panel - Schneider Electric;
Power and switching equipment - Schneider Electric;
Intermediate Relays & Terminals - Phoenix Contact;
Switchgears - Tekpan;
Year: 2021 – 2022
Client: “AS-Electrica” SRL.
Final Beneficiary: Municipal clinical hospital "Gheorghe Paladi"
Location: Chisinau city
Short description:
Automatic load transfer system consists in 2 input feeders, section circuit breaker and diesel generator control. For power circuits swtching contactors are used
Works description:
- Wiring diagrams developing
- Switchgear assembly (8 pcs)
- Commisioning works
